Canon IR1600 Reference Manual page 148

PLEASE WAIT
Cause
Remedy
PRINT LIMIT REACHED
Cause
Remedy
REC. PAPER JAM
Cause
Remedy
6
REMOVE DOC. ON GLASS
Cause
Remedy
STOP KEY PRESSED/PRESS OK KEY
Cause
Remedy
SYSTEM ERROR/E100
Cause 1
Remedy 1 Install the drum cartridge in the machine. Then turn off the main power, wait for more
Cause 2
Remedy 2 Please contact your local authorized Canon dealer.
6-18 List of Error Messages
This message is displayed when the main power is turned on. Also, when the machine
is not ready to print, this display appears.
Wait until the message disappears.
The machine is set to restrict the printing.
Enter the Department ID Management menu in the System Settings menu, open the
<COPY LIMITS> menu and change the maximum number of pages that can be
printed.
An original jam or paper jam has occurred, preventing you from making prints.
Remove paper from the machine following the guidance. If you open a cover during
printing, this message also appears. In such a case, open the cover again and check
if there is any jammed paper. If you find any, remove it, and close the cover. Then the
message disappears.
The original remains on the platen glass.
Remove the original from the platen glass, and operate the machine again.
(Stop) has been pressed while scanning the original using the feeder.
Press , and set the original again.
Drum cartridge has not been installed.
than 10 seconds, and turn it on again.
A malfunction has occurred in the machine.