Canon IR1600 Reference Manual page 161

NOTE
Copies are stapled in the following places:
- When an original is placed on the platen glass:
Copies are stapled here.
V
C B A
- When originals are placed in the feeder:
Copies are stapled here.
ABC
If the number of sheets in one set exceeds 15 stapling will not be performed. Only collating will be performed.
If the machine stops during stapling and <LOAD STAPLES> is displayed, it means that almost all of the staples have
been used up and the staple case must be replaced. To proceed, replace the staple case. (See "Replacing the Staple
Cartridge in the Stapler Unit-K1," on p. 7-16.)
Offset Mode
This function outputs paper shifted to the front.
IMPORTANT
You can offset A3 , B4 , A4 , A4 , B5 , A5 , 11" x 17"
Copies are stapled here.
V
Copies are stapled here.
ABC
, LGL , LTR , LTR , and STMT
Finisher-L1
7
.
7-9