Canon GP-300 Online Manual page 190

7. 7. Enter new administrator password.
Important
• • The following character restrictions apply to the password:
Set the password by using 4 to 32 characters.
The allowed characters are single-byte alphanumeric characters, blank space, umlaut
characters, and the below characters.
- ! @ # $ % ^ & * _ ; : , . / ` = + ' " ( ) { } [ ] < > |
For security reasons, we recommend you use 8 and more alphanumeric characters.
8. 8. Tap Apply.
9. 9. Enter administrator password you specified again.
10. 10. Tap Apply.
The administrator password is enabled.
When You Want to Disable the Administrator Password:
After tapping
Administrator password settings > Remove administrator password. Select either item and follow
the on-screen instructions to perform settings.
(Setup) on HOME screen, select Printer settings > Security settings >
190