Canon GP-300 Online Manual page 90

Important
• • If the roll paper has become unwound, remove the slack before loading the roll paper.
• • Be careful not to soil the printing surface of roll paper as you insert it in the slot. This may affect
the printing quality. We recommend wearing clean cloth gloves when handling rolls to protect the
printing surface.
• • If the paper is wrinkled or warped, straighten it out before loading it.
• Load the roll so that there is no gap between the right edge of the paper and the roll holder. •
7. After paper feeding has started, do the following operations based on the Manage 7.
remaining roll amount setting and the barcode printed on the roll paper (see
Track of the Amount of Roll Paper
• • When selecting Disable or Warning message only in Manage remaining roll amount.
A menu for selecting the media type appears on the operation panel. Operate the operation panel
and select the media type to be used.
• • When selecting Barcodes in Manage remaining roll amount and if the barcode is printed.
The type and amount of paper left is automatically detected based on the barcode printed on the
roll. There is no need to specify the type and length of the paper.
Left").
90
"Keeping