Detecting Roll Paper Was Replaced While The Power Was Off - Canon GP-300 Online Manual

Hide thumbs Also See for GP-300:

Table of Contents

Detecting Roll Paper was Replaced While the Power was Off

When you turn the printer on, it can confirm whether the roll paper was replaced while the power was off.

From Printer settings on the Home screen, set Auto feed at power on to Enable to detect the position

of the roll paper's leading edge when the power is turned on. If the position of the roll paper's leading edge

is over 1 mm since the last time the power was turned off, the printer determines that the roll paper has

been replaced, and then starts feeding paper automatically to detect the paper width and the barcode for the

management of unused roll paper.

• Setting Auto feed at power on to Enable causes the operations that can be done after turning on the

power to take longer since the printer must detect the leading edge of the roll paper.

• Auto feed at power on is set to Disable when you buy the printer.

Follow these steps to set Auto feed at power on to Enable as follows.

(Setup) on Home screen of operation panel.

• If the Home screen does not appear, press the HOME button.

2. Tap Printer settings.

3. Tap Paper-related settings.

4. Tap Auto feed at power on.

5. Tap Enable.

Gp-200 Gp-5300 Gp-5200