Elite Industries EL-147N Assembly Instructions

Phillips Head Screw Driver • Straight Blade Screw Driver • Rubber Padded Hammer or Mallet
ASSEMBLY INSTRUCTIONS
TV STAND:
Model EL-147N
Black Matte Melamine
OVERALL DIMENSIONS:
18-1/2" H x 47" W x 17-1/2" D (Top), 19" D (Bottom)
7
6
3
1
5
D 2 E
Magnetic 1/2" Wood Screws for
Touch Latch Magnetic Touch Latch
K 16 N
2
Wooden Dowels Glass Door Hinges
SPECIAL NOTE: In all steps
involving camlocks, please note the
correct position of the camlock in
the illustration at the left. Check all
camlocks before aligning and join-
ing pieces together. IMPORTANT:
Throughout assembly of the unit,
camlocks must be inserted with
the ARROW FACING THE EDGE.
IMPORTANT NOTES & CAUTIONS/WARNINGS
•
Carefully read and follow these instructions for assembly.
•
Please handle parts carefully, some parts may be heavy and can have sharp edges –
we recommend possibly using cloth protective gloves for extra protection.
•
To protect the unit and your flooring surface we recommend working on a padded
or carpeted area, you may also use the open box the unit came in for this purpose.
•
For proper construction & integrity/assembly and for TV weight support and safety,
all connections need to be sufficiently tight. However, do not over-tighten
connections to the point of stripping screw threadings. Parts are designed to fit
477445
PLEASE CALL 1-800-ELITE-48. CUSTOMER SERVICE HOURS EASTERN TIME 8:45 AM - 4:30 PM M-F
Thank you for purchasing this Elite product. You will need the following tools:
2
7
3
4
6
8
8
4 F
BLACK
Camlocks
P
2
8
Protective Plates
CAMLOCK/
CONNECTING
BOLT
PROCEDURE
PLEASE DO NOT RETURN UNIT TO STORE FOR PARTS & CUSTOMER SERVICE.
VISIT OUR WEBSITE AT: www.elite-inds.com
17-1/2"
21-3/8"
18-1/2"
CABINET PARTS
1. Bottom Panel
2. Top Panel
3. Left and Right Side Panels
(identical)
4. Center Vertical Support
5
Hardware for Unit Assembly
A
Casters
16 G
BLACK
5/8" Screws for
Back Panel
4 Q
Metal Strike Plates
1
ALIGN
CAMLOCK &
CONNECTING
BOLT
2
JOIN PIECES
TOGETHER
together tightly, however, avoid excessive force but rather align & fit panels together
methodically and with patience.
•
For some heavy or large units, it may be recommended for 2 people to work
together on this assembly.
•
It is extremely important to attach the BACK PANEL as instructed within this manual.
Such panels are crucial for the stability and structural support of the unit.
•
Please read additional important safety information at the end of this
instruction manual.
•
We urge you to keep this manual with your unit for future reference.
Page 1/4
47"
15-1/8"
14-1/8"
5. Left and Right Vertical
Mouldings (identical)
6. Two Adjustable Shelves
7. Back Panel (2 identical parts)
8. Two Glass Doors
5 B 20
CHROME
3/8" Wood Scews
for Casters
16 H 8
1" Long Shelf Pin
2 R 2
Foam
Protective Pads
3 TURN CAMLOCKS
180° CLOCKWISE
USING A FLATHEAD
SCREWDRIVER
19"
C 16
Connecting Bolts
J 16
Plastic Camlock
Covers
S 4
Plastic Bushings
ARROW WILL NOW
BE AWAY FROM
THE EDGE ON THE
OPPOSITE SIDE.
08.30.10