Elite Industries EL-9482 Assembly Instructions

ASSEMBLY INSTRUCTIONS
EL-9482
HIGH GLOSS BLACK LACQUER FINISH
56" WIDE TV STAND & AUDIO RACK COMBO
OVERALL DIMENSIONS:
3 /
19 " H x 56" W x 21
4
——— PARTS ———
PRE-ASSEMBLED BODY
Includes the following pieces
assembled by the factory.
1. Top Panel
2. Bottom Panel
3. Side Vertical Support Panels (2 Identical)
4. Center Vertical Support Panels with
Drawer Rails (2 Identical)
5. Center Drawer
6. Front Glass Doors (2 Identical)
7. Back Panel
TO BE ASSEMBLED BY CUSTOMER
8. Legs (4 identical)
9. Long Metal Rails (2 identical)
10. Short Metal Rails (2 identical)
11. Wire Management Channel
12. Glass Top
BEFORE PROCEEDING
WITH ASSEMBLY,
CHECK POSITIONS OF
GLASS DOORS
AND ADJUST IF
NECESSARY.
TOP AND BOTTOM
DOOR HINGES SHOULD
BE ALIGNED WITH
EDGE OF GLASS DOOR.
USE A STRAIGHT BLADE
SCREWDRIVER TO
LOOSEN DOOR HINGE
SCREWS. ADJUST
DOOR POSITION, THEN
RE-TIGHTEN DOOR
HINGE SCREWS.
A
Hardware
for unit
assembly
V 1
Connecting Bolts
G
Self-Adhesive
Spacer Disk for
Metal
Glass Top &
Adjustable Leg
Wire Management
PLEASE CALL 1-800-ELITE-48. CUSTOMER SERVICE HOURS EASTERN TIME 8:45 AM - 4:45 PM M-F
Thank you for purchasing this Elite product. You will need the following tools:
Phillips Head Screw Driver • Straight Blade Screw Driver • Rubber Padded Hammer or Mallet
3 /
"D
4
10
8
SPECIAL NOTE
Legs have a foil
wrapping to protect
the High Gloss
Finish. Please
wrapping before
proceeding with
Step #1, Leg
Preparation.
8 B
Camlocks
8 J 2
11/16" Screw for
Wire Management
#475752
PLEASE DO NOT RETURN UNIT TO STORE FOR PARTS & CUSTOMER SERVICE.
VISIT OUR WEBSITE AT: www.elite-inds.com
3
21 / "
4
3
19 / "
4
9
8
1
3
2
6
IMPORTANT NOTES & CAUTIONS/WARNINGS
• Carefully read and follow these instructions for assembly.
• Please handle parts carefully, some parts may be heavy and can
have sharp edges – we recommend possibly using cloth protective
gloves for extra protection.
• To protect the unit and your flooring surface we recommend work-
ing on a padded or carpeted area, you may also use the open box
the unit came in for this purpose.
• For proper construction & integrity/assembly and for TV weight
support and safety, all connections need to be sufficiently tight.
However, do not over-tighten connections to the point of stripping
screw threadings. Parts are designed to fit together tightly, howev-
er, avoid excessive force but rather align & fit panels together
methodically and with patience.
• For some heavy or large units, it may be recommended for 2 peo-
ple to work together on this assembly.
remove this
• Please read additional important safety information at the end of
this instruction manual.
• We urge you to keep this manual with your unit for
future reference.
8 C 8 D
Wooden Dowels Hex Key Tool
L 4 VX
5/8" Screws for
Plastic Camlock
Covers
Adjustable Leg
Page 1/4
56"
12
9
11
4
4
7
5
6
1 E
1-3/16" Bolts for
Metal Frame
4 X
1-3/16" Screws
Metal
for Drawer Handle
05.29.07
10
8
3
8
4 F 4
Plastic Glass
Cushion
2 Y 1
Drawer Handle