Elite Industries EL149 S Assembly Instructions

22"
30 1/4"

Hardware for unit assembly

A F
14
Connecting
Bolts
Camlocks
• Carefully read and follow these instructions for assembly.
• Please handle parts carefully, some parts may be heavy.
• To protect the unit and your flooring surface we recommend working on a padded or carpeted area, you may also use the open box the unit
came in for this purpose.
• For proper construction & integrity/assembly and for TV weight support and safety, all connections need to be sufficiently tight. However, do
not over-tighten connections to the point of stripping screw threadings. Parts are designed to fit together tightly, however, avoid excessive
force but rather align & fit panels together methodically and with patience.
• For some heavy or large units, it may be recommended for 2 people to work together on this assembly.
• It is extremely important to attach the BACK PANEL as instructed within this manual. Such panels are crucial for the stability and structural
support of the unit.
• Please read additional important safety information at the end of this instruction manual.
• We urge you to keep this manual with your unit for future reference.
SPECIAL NOTE
In all steps involving camlocks, please
note the correct position of the camlock
in the illustration at the left. Check all
camlocks before aligning and joining
pieces together.
IMPORTANT: Throughout assembly
of the unit, camlocks must be inserted with
the openings facing the nearest unfinished
edge and screwdriver slot parallel to
unfinished edge.
475865
PLEASE CALL 1-800-ELITE-48. CUSTOMER SERVICE HOURS EASTERN TIME 8:45 AM - 4:45 PM M-F
Thank you for purchasing this Elite product. You will need the following tools:
Phillips Head Screw Driver • Straight Blade Screw Driver • Rubber Padded Hammer or Mallet
ASSEMBLY INSTRUCTIONS
EL149 S — SWIVEL BASE HI-BOY STAND
OVERALL DIMENSIONS: 30 1/4" H x 22" W x 18" D, 19 1/3" (Bottom)
18"
PLEASE NOTE:
The following numbers
and letters correspond
to the sketches in this
instruction booklet.
CABINET PARTS:
1. Top Panel
2. Bottom Panel with
attached Base and
Swivel Mechanism.
3. Left and Right Side
Panels (identical)
4. Two Vertical
Mouldings (identical)
5. Two Adjustable
Shelves (identical)
6. Back Panel
(2 identical parts)
G
16
5/8"
14
Wood Screws
for Back Panel
IMPORTANT NOTES & CAUTIONS/WARNINGS
PLEASE DO NOT RETURN UNIT TO STORE FOR PARTS & CUSTOMER SERVICE.
VISIT OUR WEBSITE AT: www.elite-inds.com
3
4
H J
8
Plastic
1" Long
Camlock Covers
Shelf Pins

CAMLOCK/CONNECTING BOLT PROCEDURE

1
ALIGN CAMLOCK &
CONNECTING BOLT
Page 1/4
6
1
5
5
4
2
K
14
8
Wooden Dowels
2
TURN CAMLOCKS
180° CLOCKWISE
JOIN PIECES
USING A FLATHEAD
TOGETHER
SCREWDRIVER
6
3
RR
1
Plastic
Hole Cover
3
04.10.07