Adey MagnaClean CMX Installation And Servicing page 13

Warning Conditions for Trigger Scrolled Message "Auto Reset" "Action on Outputs"
Pump Fail
Current Sense
Parameter = Y
Pump Activated
Current level below
125mA
Service Actual date beyond
Interval
Service Date (Control
Alarm will not clear error
until new service date
entered)
Magnet-
Magnet-only service
Only requirement value has
Service been reached
Warning*
Pressure Pressure Differential
Differential
Warning value has
Warning been reached
Pressure Pressure Differential
Differential
Alarm value has been
Alarm reached (Control will
not clear error until
new service date
entered)
Low Low temperature
Temperature
alarm value reached
Alarm
High High temperature
Temperature
alarm value reached
Alarm
*NOTE: When the "Magnet-Only Service Warning" alarm is activated, the alarm is a service
reminder only which can be reset by holding down the MUTE button for 5 seconds. When the alarm
is reset via the mute button, the alarm will reinstate the previous Parameter 2 & 3 values, e.g. if
Parameter 2 is set to "Weekly" the controller will provide another warning alarm in 2 weeks until/
unless default parameters are manually updated/changed.
Pump Fail
Filter Service
Required
Magnet-Only
Service Warning
- Hold MUTE for 5
secs to reset
Differential
Pressure Warning
- Check Cartridge
Filter Service
Required
Low Temperature
Warning
High Temperature
Warning
Pump – OFF
Buzzer – ON
LED Light – ON
N
Common Alarm – ON
Pump – ON
Buzzer – ON
N LED Light – ON
Common Alarm – ON
Pump – ON
Buzzer – ON
N
LED Light – ON
Common Alarm – OFF
Pump – ON
Buzzer – ON
Y
LED Light – ON
Common Alarm – OFF
Pump – OFF
Buzzer – ON
LED Light – ON
N
Common Alarm – ON
Pump – ON
Buzzer – ON
Y
LED Light – ON
Common Alarm – ON
Pump – ON
Buzzer – ON
Y
LED Light – ON
Common Alarm – ON
13