It is recommended that the filter is installed by a qualified heating engineer. Installation overview MagnaClean Professional3 Sense can be installed anywhere before the boiler. To achieve the best level of protection, it is recommended that the filter is fitted after the last radiator and before the boiler.
Page 3
In App filter set-up Remove battery tab from filter. We recommend the batteries are replaced every two years Connect the product to the customer’s Wi-Fi Log in to or register on router following the the Adey Proclub App instructions on the App...
Page 4
ADEY ProClub App MagnaClean Professional3 Sense Dashboard Overview: MENU Enables easy navigation of App ADD A NEW FILTER To set up the filter ALERTS Informs you of the filter status including: Wi-Fi connection Magnetite build-up Service due date Low battery...
Delete filters that you no longer service FACTORY RESET Restores the product to an ‘out of box’ state The filter is disconnected from the Wi-Fi and is deleted from the Installer dashboard Please visit adey.com for further App details and support...
Page 6
New filter installation - Always ensure the filling loop is fitted after the filter. Cut and remove section using measurement guide sticker supplied. Tighten compression nuts. CAUTION: Do NOT overtighten Lock red wheel against canister.
Page 7
1 of 1 GL51 8NR DRAWN DATE ECR No. CHECKED THIS DRAWING REMAINS THE PROPERTY OF ADEY INNOVATION LTD. AND MUST NOT BE COPIED OR WEIGHT grams (est.) 0.XX - ±0.1 ANGULAR ±0.1° SCALE PASSED TO A THIRD PARTY WITHOUT PERMISSION TEL: +44 (0) 01242 546 700 Email: info@adey.com...
Page 8
Servicing 1 - Turn valves off. Isolate boiler mains ✗ 2 - Vent. power supply. Remove drain plug Turn power off. Vent. Replace drain plug. Important - Do NOT overtighten. Remove lid assembly Clean Clean Clean Remove sleeve.
Page 9
ECR No. CHECKED WEIGHT SCALE THIS DRAWING REMAINS THE PROPERTY OF ADEY INNOVATION LTD. AND MUST NOT BE COPIED OR grams (est.) 0.XX - ±0.1 ANGULAR ±0.1° PASSED TO A THIRD PARTY WITHOUT PERMISSION TEL: +44 (0) 01242 546 700 Email: info@adey.com...
Page 10
Quick-release trigger MagnaClean Professional3 Sense incorporates a secure, quick-release, trigger which enables the filter to be removed and re-installed in seconds. The connections enable easy and swift filter removal during annual servicing or to undertake a MagnaCleanse system flush. This also makes it ideal for systems where there is little room to install a filter.
Retro-Fit Installation - Upgrade a MagnaClean Professional2 to a MagnaClean ® Professional3 Sense using the simple instructions below: Isolate boiler mains 1 - Turn valves off. ✗ power supply. 2 - Vent. Turn power off. Open drain valve to release water. Fully unlock red wheel from canister.
Page 12
Set-up instructions on page 3. GL51 8NR DRAWN DATE ECR No. CHECKED THIS DRAWING REMAINS THE PROPERTY OF ADEY INNOVATION LTD. AND MUST NOT BE COPIED OR WEIGHT grams (est.) 0.XX - ±0.1 ANGULAR ±0.1° SCALE PASSED TO A THIRD PARTY WITHOUT PERMISSION TEL: +44 (0) 01242 546 700 Email: info@adey.com...
The homeowner’s Wi-Fi password is entered in order to connect the filter to the router. It is not stored by the ADEY Proclub App and cannot be accessed by the installer after filter set up. The homeowner can enter the password at this stage of connection if they do not wish to share the password with the...
How do I manage my filter stock within the App? Upon set up of a MagnaClean Professional3 Sense you can manually choose how the filter will appear in your job dashboard. We recommend using the customer’s name as it will make it easy to manage each filter within your job records.
Page 15
IMPORTANT Always follow the Standard Electrical Best Practice guidelines when installing a MagnaClean filter. A copy of these can be found at http://www.hse.gov.uk/electricity For the most up to date version of the MagnaClean Professional3 Sense Installation and Servicing instructions visit adey.com. Warranty Terms & Conditions can be found at adey.com...
Need help?
Do you have a question about the MagnaClean Professional3 Sense and is the answer not in the manual?
Questions and answers