11.2 Install the display unit
(1) Attach the flat cable connector ⑤ to the display
unit ④.
(2) Hold the flat cable connector ⑤ firmly in your hand
so that it will not be jammed between the display
unit ④ and the converter ①.
(3) Fix the display unit ④ toward the mounting direction
correctly.
(4) Insert the display unit ④ into the converter ①,
making sure that the display is in place.
11.3 Installation of front lid
(1) Hold the front lid ③ toward the mounting direction
correctly.
(2) Turn the front lid ③ clockwise to fit the converter ①
and finally fix them by a wrench or something. Make
sure that the O-ring ⑥ is squeezed so that the
instrument satisfies the IP Protection Rating.
⑦
④
Fig. 11.2 Install the display unit
①
③
Fig. 11.3 Installation of front lid
E-126-3-E
①
⑥
②
31