Table of Contents
Advertisement
Mounting kit 1
5. EXTERNAL WIRING GLAND
In case of TIIS explosionproof type
(1) This totalizer when used as a flameproof instrument uses the cable gland (pressure-tight packing) method of
IEC harmonized standards for the external wirings. Do not use cable glands other than the provided together
with the instrument. The rubber packing is provided with the product according to the finished external
diameter of cable as shown in the table below. Select and assemble the rubber packing which matches with
the external diameter of your cable.
External dimension of applicable cable
Nominal code of
packing
9
10
11
12
13
NOTE: "Applicable torque" is applied to the gland shown in the assembly diagram below.
115 mm (4.53")
100 mm (3.94")
70 (2.76")
Fig. 4.7 Dimensions of metal clamp
Internal diameter of
External diameter of
packing
φ9
φ10
φ11
φ12
φ13
Flat pattern
24
14
14
42
72
Applicable torque
cable
φ8.1 to φ9.0
φ9.1 to φ10.0
φ10.1 to φ11.0
φ11.1 to φ12.0
φ12.1 to φ13.0
Bended model
56.2
Mounting kit 2
Pressure tight packing
18.5N･m
KXB-25, 22 ORES
22.0N･m
25.8N･m
30.0N･m
KXB-25, 22 ORE
33.5N･m
E-126-3-E
model code
11
Advertisement
Table of Contents
