List Of Parameters - Oval EL0137 Instructions Manual

E-126-3-E

10.6 List of parameters

No. Name
1. tOtAL (TOTAL)
1.1 UnIt Total and instantaneous flow rate unit
1.2 dECS Decimal point position in total
1.3 ACCtOt Accumulated total value
2. rATE (RATE)
2.1 RATE Time system unit of instantaneous flow rate
Decimal point position of instantaneous
2.2 dECS
flow rate
2.3 A Sampling count
2.4 At Upper limit time of sampling
3. dISPL (DISPLAY)
3.1 UPdAt Update cycle of display
Selection of instantaneous flow rate bar
3.2 GrAPH
chart
3.3 SPAn Full scale flow rate
3.4 LIGHt Backlight lighting time
4. MEtEr (METER)
4.1 UnIt Meter coefficient unit
4.2 M.FACt Meter coefficient
Decimal point position of meter
4.3 dECS
coefficient
5. PULSE (This model does not use this parameter. Do not change the factory default settings.)
6. OtHErS (OTHERS)
6.1 MOdEL Converter model
6.2 SOFt Software version
6.3 SErIAL Serial number
6.4 COdE Password
1 to 6 in upper table: large classification
1.1 to 1.3, 2.1 to 2.4 etc. in upper table: small classification
2
Description Content of setting (setting range)
Selected from mL-L-m -g-kg-ton-SL-Sm
3
Selected from 0-1-2-3
Displays the current accumulated total value
Selected from /S-/M-/H-/d-
Selected from 0-1-2-3
1 to 255
0.1 to 999.9sec
Selected from FASt-1sec-3sec-15sec-30sec-OFF
Selected from dISAbLE-EnAbLE
0000.000 to 9999999
0 to 99sec (0 means OFF)
Selected from g/P-mL/P-L/P-SL/P-SmL/P-NL/P-NmL/
P
0.00001 to 99999999
Selected from 0-1-2-3-4-5
For in-house management
For in-house management
For in-house management
0000 to 9999 (initial value: 0000)
-NL-Nm
3 3