Commissioning; Commissioning The Controller; Basic Systems And Hydraulic Variants - Ferroli ECOTRONIC Plus Manual

ECOTRONIC Plus

3. Commissioning

3.1 Commissioning the controller

3.2 Basic systems and hydraulic variants

System 1: 1 collector field
System 2: east/west collectors
System 3: 1 collector field
System 4: east/west collectors
System 5: 1 collector field
System 6: east/west collectors
System 7: 1 collector
A solar system with a store charging in layers is implemen-
ted as a 2-store system
(store top = store 1; store bottom = store 2).
The controller is partially freely programmable. For special
applications, the relays and the corresponding sensors are
assigned in steps.
7 basic systems with different hydraulic variants each are
pre-programmed.
1. Adjust the basic system; sensors and relays will be allo-
cated automatically (see 3.2 and 4.1).
2. Activate the internal heating circuit module if needed (see
4.2.1). If the corresponding relays are intended for other
purposes, connect the external heating module HKM.
3. Activate further options (bypass, external heat exchanger
etc. see 4.1 and 4.2.)
4. Select free function blocks for further applications (re-
turn preheating, use of further heat sources; see 3.3 and
4.2.)
5. Finally, after every step, carry out special adjustments
(switching conditions and limits; see 4.1 and 4.2).
6. Up to 2 heat quantity measurement functions (see 4.3)
and other functions such as reports or chimney sweeper
can be activated.
The controller can be adjusted in steps (see 3.4.) All func-
tions, options and menu items are described in detail in
chapter 4.
The controller is preprogrammed for 7 basic systems. The
selection depends on the number of heat sources (collec-
tor fields) and heat sinks (stores, pool). Factory setting is
system 1.
- 1 store
- 1 store
- 2 stores
- 2 stores
- 3 stores
- 3 stores
- 4 stores
11
|