Table of Contents
Advertisement
Pick up the Laser Cartridge by the sides. Tilt the
•
Laser Cartridge downward on a 30-degree angle.
Mount the cartridge onto the Mounting Blocks by
placing the upper "V" groove of the cartridge on
top of the Mounting Blocks. Slide the cartridge to
the right until the Alignment Plate of the Laser
Cartridge makes contact with the inside of the
large protruding plate of the Alignment Fork.
Plug in the Power Connector. The connector is
•
keyed so it will only insert one way.
Close the Rear Cover and push down on the
•
latches until they "click.
Slowly rotate the Laser Cartridge making sure
•
that the Alignment Plate is centered in the small
gap of the Alignment Fork. And the Laser Latch
"clicks" and locks the cartridge into place. It may
require some slight force to actuate the latch.
Close-up view of small gap
Verify that the Laser Cartridge is resting, at a
•
90-degree angle, and the Alignment Plate is
centered within the Alignment Fork.
Installation
2-5
Advertisement
Table of Contents
