Danfoss VLT Micro FC 51 Quick Manual page 18

1 Quick Guide
Current mode (Terminal 53 and 60)
Voltage level
1
Input resistance, R
i
Max. voltage
Current level
Input resistance, R
i
Max. current
Analog output:
Number of programmable analog outputs
Terminal number
Current range at analog output
Max. load to common at analog output
Max. voltage at analog output
Accuracy on analog output
Resolution on analog output
Control card, RS-485 serial communication:
Terminal number
Terminal number 61
Control card, 24 V DC output:
Terminal number
Max. load (M1 and M2)
Max. load (M3)
Max. load (M4 and M5)
Relay output:
Programmable relay output
Relay 01 Terminal number
Max. terminal load (AC-1)
Max. terminal load (AC-15)
Max. terminal load (DC-1)
Max. terminal load (DC-13)
Max. terminal load (AC-1)
Max. terminal load (AC-15)
Max. terminal load (DC-1)
Min. terminal load on 01-03 (NC), 01-02 (NO)
Environment according to EN 60664-1
1) IEC 60947 part 4 and 5
Control card, 10 V DC output:
Terminal number
Output voltage
Max. load
All inputs, outputs, circuits, DC supplies and relay contacts are galvanically isolated from the supply
voltage (PELV) and other high-voltage terminals.
Surroundings:
Enclosure
Enclosure kit available
Vibration test
Max. relative humidity
Aggressive environment (IEC 60721-3-3), coated
Test method according to IEC 60068-2-43 H2S (10 days)
Ambient temperature
Derating for high ambient temperature, see section on special conditions
18
1)
on 01-02 (NO) (Resistive load)
1)
on 01-02 (NO) (Inductive load @ cosφ 0.4)
1) on 01-02 (NO) (Resistive load)
1) on 01-02 (NO) (Inductive load)
1)
on 01-03 (NC) (Resistive load)
1) on 01-03 (NC) (Inductive load @ cosφ 0.4)
1) on 01-03 (NC) (Resistive load)
5% - 95%(IEC 60721-3-3; Class 3K3 (non-condensing) during operation
MG.02.B5.02 - VLT
Quick Guide for VLT Micro FC 51
Max. error: 0.8 % of full scale
68 (P,TX+, RX+), 69 (N,TX-, RX-)
Common for terminals 68 and 69
24 V DC 10 mA, 24 V AC 20 mA
overvoltage category III/pollution degree 2
®
is a registered Danfoss trademark
Switch S200=ON(I)
0 -10 V
approx. 10 kΩ
20 V
0/4 to 20 mA (scaleable)
approx. 200 Ω
30 mA
1
42
0/4 - 20 mA
500 Ω
17 V
8 bit
12
160 mA
30 mA
200 mA
1
01-03 (break), 01-02(make)
250 V AC, 2 A
250 V AC, 0.2 A
30 V DC, 2 A
24 V DC, 0.1A
250 V AC, 2 A
250 V AC, 0.2A
30 V DC, 2 A
50
10.5 V ±0.5 V
25 mA
IP 20
IP 21, TYPE 1
1.0 g
class 3C3
Max. 40 °C