Roverpet KK3 Assembly Instructions Manual

Roverpet
20 Kiji Dava Circle Prescott, Arizona 86301
Roverpet #KK3 Cat Climber Assembly Instructions
Roverpet #KK3 Climber Inventory:
(4) #24TLC legs
(4) #46URP long uprights
#17CBC crossbars (17" long)
(10)
#23CBC crossbars (23" long)
(10)
(10) #250 divider clips
# FDC "custom" wall clips with screws
(6)
(5) Sheep skin furry pads
(3) #CSR12 cat scratch rollers
1.) Unpack shipping carton and inspect quantity of components against
inventory list above.
2.) As assembly will be accomplished by first building two separate towers
and then attaching them together, gather the parts needed to assemble
the two-level tower first as follows:
(2) #24TLC legs, (2) #18TAC arms, (4) #34URP short uprights,
(4) #17CBC crossbars, (4) #23CBC crossbars, (2) sheepskin pads
3.) Connect two #24TLC legs together by inserting two #17CBC crossbars
into the holes between them as seen in the photo below.
800-658-5925
(4) #18TAC arms
rover@roverpet.com
(4) #34URP short uprights