Presence Of Usb Headset - Avaya 1040E User Manual

Table 10: Configuration options on the headset screen
(Part 3 of 3)
Option
MHA Back Light
The changes in the menu take effect immediately if the device is
attached. The active voice path switches to the selected headset if you
are on an active call. If you press the
then the changes are applied, the settings are made permanent by
storing the values in persistent storage, and they are applied every time
the IP Deskphone starts up. However, all changes made are ignored and
restored if you press the

Presence of USB headset

On the menu, choose
System
to verify the presence of the USB headset attached to the IP Deskphone.
When you select the
along with other USB devices. The name of the USB device directly
appears from the USB devices themselves. The product description has
no explicit USB headset indications for the attached USB headset. The
following figure displays the headset setting screen.
Configuring the Avaya 1140E IP Deskphone
Enable the MHA Back Light (only
if Avaya headset adapter is
detected).
The checkbox is used to enable
or disable the back light
equipped in Avaya Enhanced or
Mobile headsets. The command
is ignored for other types of USB
headsets. This item is dimmed if
the attached headset is not one
of the Avaya headset types.
Apply
context-sensitive soft key.
Back
Phone
menu, the attached USB headset is displayed
USB
Function
context-sensitive soft key,
Information, and then select
USB
111