Guidance And Manufacturer's Declaration For Spot Vital Signs Lxi Radio - Welch Allyn Spot Vital Signs LXi Service Manual

Service Manual
Guidance and Manufacturer's Declaration For Spot Vital
Signs LXi Radio
Emissions and Immunity Information
The Spot Vital Signs LXi is intended for use in the electromagnetic environment specified below. The customer or user of the Spot Vital Signs
LXi should assure that it is used in such an environment.
Emissions Test Compliance
RF emissions Group 1
CISPR 11
RF emissions Class B
CISPR 11
Harmonic emissions Class A
IEC 61000-3-2
Voltage fluctuations/ Complies
flicker emissions
IEC 61000-3-3
The Spot Vital Signs LXi is intended for use in the electromagnetic environment specified below. The customer or user of the Spot Vital Signs
LXi should assure that it is used in such an environment.
Immunity Test IEC 60601
Test Level
Electrostatic discharge ± 6 kV contact
(ESD)
± 8 kV air
IEC 61000-4-2
Electrical fast transient/ ±2 kV for power supply
burst lines
IEC 61000-4-4 ±1 kV for input/output
lines
Surge ±1 kV differential mode
IEC 61000-4-5 ±2 kV common mode
Electromagnetic Emissions
Electromagnetic Environment - Guidance
The Spot Vital Signs LXi uses RF energy only for its internal function. Therefore, its RF
emissions are very low and are not likely to cause any interference in nearby electronic
equipment.
The Spot Vital Signs LXi is suitable for use in all establishments, including domestic
establishments and those directly connected to the public low-voltage
power supply network that supplies buildings used for domestic purposes.
Electromagnetic Immunity
Compliance Level Electromagnetic Environment - Guidance
± 6 kV contact Floors should be wood, concrete, or ceramic tile. If floors are
covered with synthetic material, the relative humidity should
± 8 kV air be at least 30%.
±2 kV for power supply Mains power quality should be that of a typical commercial or
lines hospital environment.
±1 kV for input/output
lines
±1 kV differential mode Mains power quality should be that of a typical commercial or
hospital environment.
±2 kV common mode
Specifications 69