Restore To Factory Default Values - ITS Telecom EKSELANS CCA 370001 User Manual

To unsubscribe cards into the system, perform this process:
Step 1
Step 2
Step 3

6.4. Restore to factory default values

The following process restores the original default factory values. Registered user cards, are NOT lost.
Registered
master cards, yes. Other values are set back to factory default:
Step 1 Power off the controller
Make a short circuit between GND and OPEN.
Step 2
Otherwise, should a push button be connected (for opening
purposes), keep it pressed.
Step 3 Power on the system again
Step 4 Keep the short circuit for at least 10 seconds.
ITS Partner O.B.S S.L · Av. Cerdanyola 79-81 Local C
08172 Sant Cugat del Vallés · Barcelona (Spain)
Phone: +34935839543 · info@ek.plus · www.ek.plus
Sweep MASTER DELETE card
Sweep the user card
Sweep MASTER DELETE card
USER MANUAL CCA
More user cards may be swept (A
sound will be heard)
Two sounds will be heard
and the LED will change its
colour
A sound will be Heard and
will enter in stand-by mode.
(Red LED)
16