ITS Telecom EKSELANS CCA 370001 User Manual page 12

To add user cards in a particular position:
Step 1
Step 2
Step 3
•
Unsubscribing:
To delete a user card by reading it with the card reader (Not lost card):
Step 1
Step 2
Step 3
Note that a bubble can be been created. There can be an empty identifier position not linked
To delete a user card from a specific position (The card is lost):
Step 1
Step 2
Step 3
Note that a bubble can be been created. There can be an empty identifier position not linked
with a user card.
To delete all user cards in the system
Step 1
Paso 2
Step 3
ITS Partner O.B.S S.L · Av. Cerdanyola 79-81 Local C
08172 Sant Cugat del Vallés · Barcelona (Spain)
Phone: +34935839543 · info@ek.plus · www.ek.plus
Enter in the programming mode
Insert the desired identifier and sweep the
card.
Exit the programming mode
Enter in the programming mode
Sweep the card to be unsubscribed. This
position will be empty
Exit the programming mode
with a user card.
Enter in the programming mode
Insert the identifier position to be deleted.
This position will be deleted
Salir del modo programación
Enter in the programming mode
Exit the programming mode
USER MANUAL CCA
< Master code >
1 < Desired identifier >
Sweep card > Where <Desired
identifier> is a number from 1
to 999. Do not insert 00x. Insert
x directly
< Master code >
2 < Sweep card >
.
< Master code >
2 < Identifier Where
<Identifier> is a number from 1
to 999. Do not insert 00x. Insert
x directy.
< Master code >
2 < Master code >
<
12