Peering Scenario; Settings Configuration On The Gds3710 Side; Figure 1: Gxv3275 Peered With The Gds3710 - Grandstream Networks GDS3710 Configuration Manual

Hide thumbs Also See for GDS3710:

Table of Contents

https://arttel.ru/

PEERING SCENARIO

We assume that the GDS3710 is installed on a small warehouse at front door and GXV3275 inside to

monitor and control the access of the premise. Employees can swipe the RFID card to get in, while visitors

need to press the Door Bell to initial video call and the related person at the GXV3275 side need to type

the key PIN to open the door remotely to allow the visitors to get in as shown in the figure below.

IP: 192.168.5.123

The IP address used by the GDS3710 is 192.168.5.123.

The IP address used by the GXV3275 is 192.168.5.124.

The GDS3710 needs to be configured with the IP address of the GXV3275 and related SIP port, and remote

PIN for door opening. (the second account will be used on the GXV3275 for this example, when using third

or fourth... accounts, the port number associated to each port is needed 5064,5066...).

Access the GDS3710 webGUI and navigate to "Door System Settings > Basic Settings" then set the

following as shown on the figure below:

https://arttel.ru/shop/ip-domofony/grandstream-gds3710

Front Door

GDS3710

Connecting GDS3710 with GXV32XX Configuration Guide

GXV3275

IP: 192.168.5.124

Ethernet PoE connection

Power connection

Ethernet cable

P a g e

Table of Contents