Advertisement
Quick Links
Instant Shed - Peak Style 6' x 12' x 8'
Assembly Instructions
C
B
DESCRIPTION
MODEL #
A
B
C
CIS 612
Instant Shed 1.8 x 3.7 x 2.4 M - Green
3503504
6' x 12' x 8'
RECOMMENDED TOOLS
OR
Please read instructions COMPLETELY before assembly. This shelter MUST be securely anchored.
Before you start: 2 or more individuals recommended for assembly, approximate time 2 hours.
PARTS & SERVICE: 0208 988 7400
E-mail: Parts@clarkeinternational.com or
Clarke International
Service@clarkeinternational.com
Hemnall Street
Epping
Essex CM16 4LG
SALES: UK 01992 565333 or
ENGLAND
EXPORT: 00 44 (0)1992 565335
www.clarkeinternational.com
4/3/12
Page 1
05_70416_0A
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Clarke CIS 612
Summary of Contents for Clarke CIS 612
- Page 1 Instant Shed - Peak Style 6' x 12' x 8' Assembly Instructions DESCRIPTION MODEL # CIS 612 Instant Shed 1.8 x 3.7 x 2.4 M - Green 3503504 6' x 12' x 8' RECOMMENDED TOOLS Please read instructions COMPLETELY before assembly. This shelter MUST be securely anchored.
-
Page 2: Care And Cleaning
International is not responsible for damage to the unit or the contents from acts of nature. Any shed that is not anchored ® securely has the potential to fly away causing damage. Periodically check the anchors to ensure stability of the shed. Clarke ®... - Page 3 Instant Shed - 6' x 12' x 8' - Parts List - Model # CIS 612 3503504 Description of Parts: Quantity Part # Cross Rails, Swedge 65,4 cm 800704 800703 Cross Rails 62,4 cm 802636 Cross Rails 84 cm 802837...
- Page 4 1. ASSemble 2 end RIbS Secure connections using Bolts as shown with #01010 Nuts. 802860 801204 01010 802636 802636 800938 801204 801204 #03032 10114 800938 800938 800599 #10114 800599 800599 800598 800598 #10115 802836 802836 noTe: the bolt heads at the end ribs must be facing outward to avoid damaging your cover.
- Page 5 3. connecT FRonT end RIb To mIddle RIb A. Assemble 2 Side Cross Rails using parts as shown. B. Assemble 1 Top Cross Rail using parts as shown. C. Connect the Top Cross Rail at the 3- and 4-Way Connectors as shown. D.
- Page 6 4. connecT RemAInInG RIbS A. Assemble 4 Side Cross Rails using parts as shown. B. Assemble 2 Top Cross Rails using parts as shown. C. Connect the Top Cross Rails at the 3- and 4-Way Connectors as shown. D. Connect the Side Cross Rails at the Shelter Stabilsers. Assemble Side Cross Rails Assemble Top Cross Rail 10115...
- Page 7 5. SqUARInG UP THe FRAme A. Place frame in its final location, which needs to be as flat and level as possible. B. Measure across opposite corners. These distances must be equal to within 1 inch. C. Check that the front and rear of the frame measures 6 feet in width 6 ft.
- Page 8 7. dooR PAnel And bAcK PAnel InSTAllATIon A. (1) Hold end panel at the top center with white inner surface facing inside of the shelter. (2) Wrap the edges of the fabric panel around the end rib and line up the cross rails with the pre made slits in the fabric. B.
- Page 9 7. end PAnel InSTAllATIon - continued D. At the bottom, where the webbing exits the pocket on each side of end panel, pull webbing as you would a drawstring to remove the slack. Be careful not to pull the webbing strap out of the webbing pocket. END PANEL VIEW FRoM INSIDE SHED...
- Page 10 D. Disassemble cover rails and slide through fabric pockets at each leg and reattach with clamps to each leg. Repeat this on other side. Push down on cover rails to tighten cover, before tightening bolts completely. E. Check and tighten Ratchets and Cover Rails monthly to ensure the cover is tight. NOTE: The Clarke logo should ®...
- Page 11 oThER qUALITy LEISURE & gARdEnIng PRodUCTS AVAILAbLE fRom LogbUSTERS bAnqUETIng TAbLES bbq’s PoRTAbLE gEnERAToRS gARdEn TRoLLEyS bInoCULARS LEd hEAdLIghTS / fLAShLIghTS hoT & CoLd PowER wAShERS tarpaulins • insect killers CAR CoVERS InVERTERS jUmP STARTS foot pumps • fans LAddERS And mUCh moRE! PARTS &...
Need help?
Do you have a question about the CIS 612 and is the answer not in the manual?
Questions and answers