2-2. REMOVAL OF CABINET
2-2-1. CSP-5000E
Screw
(PSW4x10)
Front Panel
Top Panel
1. Unscrew the four +/-BW screws (a), and remove the top panel in direction A.
Front Panel
1. Loosen the panel open/close screw, and open the front panel.
2. Pull out the CPU-185 board slightly in the arrow direction, and disconnect the two connectors (CN604, 613).
3. Unscrew the two screws (PSW3x6), and remove the front panel.
Cabinet
1. Unscrew the eight screws (PSW4x10), and remove the Rack Angle Assembly.
2. Unscrew the four +/-BW screws (b), and pull out the main chassis in direction B.
Note :
Hook the bottom edge of the main chassis into the two claws on the cabinet, and install the main chassis.
CSP-5000E
CSPK-5000E
http://getMANUAL.com
Screw (a)
(+/-BW)
Top Panel
Main Chassis
CN613
CN604
Screw (b)
(+/-BW)
Screw
(PSW4x10)
CPU-185 Board
Rack Angle
Ass'y
Screw
(PSW3x6)
Claw
Screw (a)
(+/-BW)
A
B
Cabinet
Screw
Rack Angle
(PSW4x10)
Ass'y
Screw (a)
(+/-BW)
Screw
(PSW4x10)
2-3