Rear; Connections; Before Connecting; Opening And Closing The Cabinet - Sony UPA-PC500 Manual

Digital photofinishing system controller
Hide thumbs Also See for UPA-PC500:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

Rear

6
5
4
3
A Cooling fans
Force air to pass through the unit to keep it cool
during operation.
B Wiring hole
Allows for convenient wiring of the AC power cord.
C Wiring hole
Allows for convenient wiring of the various
connection cables.
D Special connector
Not currently used. For future use.
E 1 (On/Standby) button
Press this button to start the unit.
Note
For an emergency shutdown, press and hold this
button for at least four seconds. The unit will be
forcibly shut down.
F Ventilation holes
Allow air to pass through the unit to keep it cool
during operation.
6

Connections

Before Connecting

1
All the connectors for the unit are located behind the
front panel. This section describes how to access and
operate the front panel safely and illustrates the layout of
the internal connectors.
Note
Remove the internal packing material the first time you
open the unit, and save it in case you need to transport
the unit later.

Opening and Closing the Cabinet

To open the cabinet
2
1
2
Connections
Unlock the cabinet lock on the left side of the unit
using the supplied cabinet key.
Pull out the drawer using the handholds on both
sides.
Note
Do not remove the cabinet key when the drawer is
open.
Shutting the drawer while the key is removed may
damage the lock and prevent the key from being
inserted.

Advertisement

Table of Contents
loading

Table of Contents