Specifications - ESAB PCM-500i Instruction Manual

SECTION 1
Description
Spare Parts Kit P/N 0558003301 includes:
35/40 A Nozzle
Electrode
Swirl Baffle
Heat Shield
NOTE: PT-31XL Torch Assembly P/N 21985 is supplied with the nozzle, electrode, swirl baffle, and heat shield assembled.

1.4 SPECIFICATIONS

Refer to Tables 1-3, 1-4, and Figures 1-1 and 1-2 for PCM-500i technical specifications.
Rated
Output
Output Current Range
Open Circuit Voltage
Rated Primary Input
@
35 A @ 120 VDC Output
Power Factor @ 35 Amperes Output
Efficiency @ 35 Amperes Output
Current Capacity
Air Requirements
Dimensions of PCM-500i
Weight (less torch, work cable)
* Duty cycle is based on a 10-minute period; therefore, a 40% duty cycle means the machine may operate for 4 minutes with a cool down period of 6 minutes;
a 60% duty cycle means the machine may operate for 6 minutes with a cool down period of 4 minutes; a 100% duty cycle means the machine may operate
continuously.
** Includes 2.2-in. (56 mm) high handle.
8
Table 1-2. PT-31XL Spare Parts Kit Contents
Table 1-3. PCM-500i Specifications
40% Duty Cycle*
60% Duty Cycle*
100% Duty Cycle*
208/230 VAC, 1-Phase
380/415 VAC, 3-Phase
Part Number
20860
20862
20463
20282
81% (1-Phase)/94% (3-Phase)
PT-31XL
PT-31XL
Length
Height
Width
DESCRIPTION
Quantity
3
2
1
1
35 A @ 120 V dc
30 A @ 120 V dc
22 A @ 120 V dc
10 to 35 Amperes
265 V dc Nominal
30/25 A, 50/60 Hz
8/7.5 A/Phase, 50/60 Hz
90% (Typical)
50 A DCSP
250 cfh @ 80 psi
19.3-in. ( 490 mm)
17.8-in. (452 mm)**
8.6-in. (218 mm)
50 lbs (23 kg)