Table of Contents
Advertisement
SECTION 2
PT-31XL
WORK
SAFETY
GROUND
12
WORK CABLE
Allow at least 10 ft (3 m)
between work and power
source
PLUG
(Equipped only on
230 V, 1-phase units)
Figure 2-1. PCM-500i Interconnection Diagram
ACCESS DOOR FOR
TORCH CONNECTION.
Prefiltered AIR SUPPLY (Customer Supplied)
(90 to 150 psig max)
CUSTOMER FUSED LINE
DISCONNECT SWITCH
(See Table 2.1 and WARNING in
regards to chassis ground in Sec-
tion 2.5.)
RECEPTACLE (P/N 674540)
(Optional for 208/230 V, 1-phase
power sources)
INSTALLATION
TORCH
POWER CABLE
CONNECTION
TORCH SWITCH
RECEPTACLE
NOTE: If using 208 V input,
see Section 2.7 and
Fig. 2-2.
See Table 2.1
Hide quick links:
Advertisement
Table of Contents
