Windscreen Wipers, Windscreen/headlight Washer
Note: This stalk also provides control of
the display, for additional information about
display control, see the separate Operation
Instruction "Display".
1 Interval wiping
Used when driving in mist or drizzle
conditions.
The wipers make one sweep every 10
seconds. To reduce the time between
sweeps, move the stalk to the normal
position, and then, after the desired time
interval, back to the interval wiping
position. This permits the wiping interval
to be set to any value between 1 and 10
seconds.
2 Flick wipe position.
If you want the wiper to make only one or
two strokes (e.g. drizzle), move the lever
to the flick wipe position and keep it there
with your finger. The wipers will stop in
parking position after releasing the lever.
3 Windscreen wipers, normal speed.
4 Windscreen wipers, high speed.
5 Windscreen washers + headlight
washers.
Moving the stalk to this position will also
activate the windscreen wipers, which will
make an additional 2-3 sweeps after the
stalk has been released.
The headlight washers and windscreen
washers have a common fluid reservoir.
Instruments and Controls 51
T0012079