46 Instruments and Controls
Controls
Starting Switch
The ignition switch has four positions:
0
Stop position.
I
Intermediate position. In this position
certain electrical devices can be used
according to customer requirements.
II
Drive position. Between positions II
and III there is a spring-return position
for preheating.
III Start position. Spring-return.
Note: Removing the key from the starting
switch activates the steering lock.
Note: The key can only be removed from the
starting switch when it is in the stop position.
Note: Do not remove the key from the
starting switch when the bus is being towed!
Note: Always remove the key from the
starting switch when leaving the bus.
T0014333