Engine Control Box in Engine Bay
The engine control box is located behind the
engine hatch in the back of the bus. It is used
only in conjunction with servicing.
CAUTION
To avoid accidental engine turning on
while you are in the engine bay, the switch
(1) must be in position 0.
The control box has three controls:
1 Start enable switch
When the switch is turned to position 1,
the engine can be started from either the
start button on the control box, or the
key ignition on the dashboard. When the
switch is turned to position 0, the engine
cannot be started from the engine bay, nor
from the dashboard.
2 Start button
When switch (1) is turned to position
1, pressing this button starts the engine.
To allow the engine to be started from
the control box in the engine bay, the
transmission must be in neutral position
(N), and the ignition key in the "DRIVE"
position.
3 Emergency stop button
To stop the engine press the red button.
Emergency and Safety Equipment 77
T2023998