ABB GE ReliaGear AMP1 Installation Instructions Manual page 22

A M P 1 I N T E G R AT E D P O W E R A N D E N E R G Y I N S TA L L AT I O N I N S T R U C T I O N S
22
AMP1
Analog_input objects (cont.)
No. Name Description
KW_Max_ Total Real Power
AI37
Demand Maximum Demand
KVAR_Max_ Total Reactive Power
AI38
Demand Maximum Demand
KVA_Max_ Total Apparent Power
AI39
Demand Maximum Demand
AI40 Pulse_Count_1 Pulse Count #1
AI41 Pulse_Count_2 Pulse Count #2
Real Energy
AI42 KWH_A Consumption
Phase A
Real Energy
AI43 KWH_B Consumption
Phase B
Real Energy
AI44 KWH_C Consumption
Phase C
Theoretical Maximum
AI45 Max_Power
System Power
AI46 Reserved_AI46 Reserved
Count of Energy
AI47 Energy Resets
Accumulator Resets
AI48 Reserved_AI48 Reserved
AI49 Reserved_AI49 Reserved
AI50 Power Up Count Power Up Counter
AI51 Ouput Config Ouput Configuration
AI52 Reserved_AI52 Alert Summary Register
For troubleshooting or service related questions, contact ABB at 800-782-8061 or at epis.component.support@abb.com
R/W NV Units Range
0 - Max_Power
R NV kW
(AI45)
0 - Max_Power
R NV kVAR
(AI45)
0 - Max_Power
R NV kVA
(AI45)
R NV # 0 - 4294967040
R NV # 0 - 4294967040
R NV kWh 0 - 3.4+E38
R NV kWh 0 - 3.4+E38
R NV kWh 0 - 3.4+E38
R NV kW 0 - 1.84467e19
R – – 0
R NV – 0 - 32767
R – – 0
R – – 0
R NV – 0 - 32767
R NV – 0 - 15
R – – 0 - 32767
Additional information
This retains the largest value measured for Total
Real Power Demand (AI34) for any single demand
interval since the Max Demand were last explicitly
reset via AV1 (this is also reset when the demand
interval is changed).
This retains the largest value measured for Total
Reactive Power Demand (AI35) for any single
demand interval since the Max Demand were last
explicitly reset via AV1 (this is also reset when the
demand interval is changed).
This retains the largest value measured for Total
Apparent Power Demand (AI36) for any single
demand interval since the Max Demand were last
explicitly reset via AV1 (this is also reset when the
demand interval is changed).
Running count of contact closures on Pulse1 input
since last reset. Write 16498 (0x4072) to the
Present_Value property of Analog_Value object AV1
to reset both Pulse Counters to 0.
Pulse Count 2; Running count of contact closures on
Pulse2 input since last reset. Write 16498 (0x4072)
to the Present_Value property of Analog_Value
object AV1 to reset both Pulse Counters to 0.
–
–
–
Theoretical Maximum System Power – This is the
theoretical maximum power the meter expects to
see on a service. It is calculated by the meter from
the System Type (in object AV2), CT Size (in object
AV3), and System Voltage (in object AV6) - Power
Factor is assumed to be unity. The register is
updated whenever the user changes any of these
parameters.
Returns QNAN or any value
Running count of how many times the energy
counter
has been reset
Returns QNAN or any value
Returns QNAN or any value
Running count of product power-up cycles (Control
Power)
Returns "0"
This contains a decimal value that represents the
status of all Binary_Object alert values in one
number that can be read without having to access
mulitple objects. It is a decimal representation of a
15-bit hexidecimal value produced by combining the
15 alert bits into one number, where the bit value of
Object BI1 is the least significant bit and BI15 is the
most significant bit.