Maintenance
9.3 Repair
9.3
Repair
The Siemens Service Center Bad Neustadt and other regional service sites throughout the
world can handle or organize the maintenance/repair of the motors.
Contact your regional Siemens contact if you require this service.
Note regarding encoder replacement
You can replace a defective encoder.
The procedure for replacing an encoder is described in Service manual replacing an encoder
(https://support.industry.siemens.com/cs/document/99457853/encoder-replacement-in-1fk7-
g2-and-1ft7?dti=0&dl=en&pnid=13308&lc=de-WW).
116
1FK7 G2 synchronous motors
Operating Instructions, 05/2021, A5E50907562B AA