Siemens SIMOTICS S-1FK7 Operating Instructions Manual page 88

2nd generation synchronous motors

Table of Contents

Connecting

5.4 System integration

3. Push the power connector onto the motor connecting socket as far as it will go.

4. Turn the union nut by hand in the direction of "close" by at least 45° (position A) or up to the

end stop (position B)

Note

A secure connection is only guaranteed from position A onward.

You have established a secure connection.

Releasing a SPEED-CONNECT connection

Procedure

1. Turn the union nut of the SPEED-CONNECT connector in the direction of "open" to the end

stop. The triangles on the top of the connectors must be opposite one another.

2. Withdraw the connector.

Note

Pull out the connector at the connector itself, do not pull on the cable.

You have terminated the SPEED-CONNECT connection.