I、 Equipment Necessary Before - Makeblock mEggBot User Manual

I、 Equipment necessary before
1. Hardware:
①.mDrawBot kit
②. Assemble Instruction V1.1 20150704
2. Software:
a. Necessary software
mDraw
Inksape
B. Software possibly required
Arduino IDE
Makeblock main board drive
load and install the drive)
3. Download software and detained information package
http://learn.makeblock.cc/mdrawbot/
Hint 1
4 assembly modes are used for mDrawBot, the assembly of
accuracy requirement, install and finely adjust the robot strictly as required by the assembly
description, especially adjustment of shaft and rotating part, steering engine and rudder arm, machine
levelness.
Hint 2
The material object may differ from the picture provided in the specification, so the specification
is only for reference, and specification and software may be changed without prior notice. Please
assess the website for detailed change:
mEggBot User Guide
(Note: If Mac OS system is used, click hyperlink to
http://learn.makeblock.cc/mdrawbot/
i
all movable parts has assembly