Installing Brush Holder And Brush Assembly; Installing Rear Bracket; Installing Magnetic Switch - Mitsubishi Heavy Industries SL Series Service Manual

ELECTRICAL SYSTEM
2.5.5

Installing brush holder and brush assembly

Attach the socket to the commutator of the armature.
While sliding the brushes on the socket, install the brush
holder and brush assembly on the armature.
2.5.6

Installing rear bracket

Install the rear bracket to the yoke, and tighten the through
bolt and the brush holder screws.
2.5.7

Installing magnetic switch

(1) Install the magnetic switch and tighten the screws.
(2) Connect the lead to the terminal M and secure it with
the fixing nut.
12-22
Socket
Installing brush holder and brush assembly
Through bolt
Brush holder retaining bolt
Installing rear bracket
Retaining bolt
Installing magnetic switch
Brush holder
Brush assembly
Rear bracket
Connector
Magnet switch