Avaya ERS 2500 Series Troubleshooting Manual page 78

Troubleshooting authentication
1. Enter the show eapol multihost interface <port#> command to display
2. Ensure that Allow Non-EAPOL clients is enabled.
3. Ensure that the Multihost status is enabled.
Enabling multihost status and allow non-EAPOL clients
Correct the non-EAP client attribute.
1. Use the eapol multihost allow-non-eap-enable command to allow non-
2. Use the eapol multihost enable command to enable multihost status.
Showing EAPOL multihost non-eap-mac interface
Display the EAPOL multihost interface information.
1. Enter the show eapol multihost non-eap-mac interface <port>
2. Note that the MAC address is in the list.
Ensuring MAC in the list
Add the MAC address to the list if it was omitted.
1. Use the show eapol multihost non-eap-mac status <port> command
2. Use the eapol multihost non-eap-mac <H.H.H> <port> command to add
78 Troubleshooting
the information.
EAPOL clients.
command to display the information.
to view MAC addresses.
a MAC address to the list.
November 2010