Avaya ERS 2500 Series Troubleshooting Manual page 86

Troubleshooting authentication
1. Enter the show eapol port <port#> command to display the information.
2. Ensure that global EAP is enabled and that the port status is eap-auto.
Setting global EAP enabled and port at eap-auto
Make the required changes to ensure that EAP is enabled globally and that the port status is
set to auto.
1. Use the eapol enable command to enable EAP globally.
2. Use the eapol status auto command to change port status to auto.
Showing EAPOL multihost
Review the EAPOL multihost information.
1. Enter the show eapol port multihost command to display the information.
2. Note the following:
Formatting non-EAPOL RADIUS password attribute
Make the required changes on the RADIUS server to the password format.
Use vendor documentation to make required changes on RADIUS server to change the format
to IpAddr.MACAddr.PortNumber.
Enabling RADIUS to authenticate non-EAPOL clients
Make the required changes on the RADIUS server to authenticate non-EAP clients.
Apply changes to RADIUS server using vendor documentation.
86 Troubleshooting
Use RADIUS To Authenticate NonEAPOL Clients is enabled
November 2010