Advertisement
If vacuum relief suction outlets are located below freeze line skip steps 1 and 2.
1. Remove grate from wall drain and install a 13-¾ blow through plug and blow line to achieve airlock.
2. If 3rd suction line is installed remove grate, install a 13-¾ blow-through plug and blow line to
achieve airlock.
3. If vent tube is installed, install blow through plug and blow line to achieve airlock. Repeat vacuum
out canister. For winterizing canister visit www.1Paramount.com and click on winterization
instructions.
If vacuum relief suction outlets are located below freeze line skip steps 1 and 2.
1. Remove grate from wall drain and install a 13-¾ blow through plug and blow line to achieve airlock.
2. If 3rd suction line is installed remove grate, install a 13-¾ blow-through plug and blow line to
achieve airlock.
3. If vent line is installed in main suction line, plug vent line and install blow through plug in pump inlet
and blow line to achieve airlock.
4. Lastly, blow vent line to achieve airlock.
MDX-R3 WINTERIZATION
WITH CANISTER
WITHOUT CANISTER
For technical assistance call 1.800.621.5886 or contact your regional representative
11
Advertisement
