Output|Input|Overview - RGBlink Q16pro User Manual

3.2.3 Output|Input|Overview

Device Connection
1. Click the device you need in the <All Devices>
list,such as
Q16pro SN: 8043, IP: 192.168.0.114
2. click in the <Chosen Device>.
The rear panel can be seen after connection
Note： purple tip indicates input,
Output Setting
Resolution
Click any output port, the board where the port
locates is selected. Users can do settings to the port
now.
A red rectangle flashes around the chosen port
when it is clicked.
Standard Resolutions can be chosen as shown in the
right figure.
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197 | support@rgblink.com | www.rgblink.com
blue tip indicates output,
25
yellow tip indicates communication.