Xpose App Control - RGBlink Q16pro User Manual

3.3 XPOSE APP Control

Q16pro support to load scene via XPOSE APP.(Note:The device and phone must be in the same network)
Connect Q16pro and phone
Method 1:Connect wireless in the same WIFI
Method 2:Direct connection
(1) Install XPOSE APP in your phone first and then click
to open it,click "search"
(2) Select Q16pro model and click the icon
top right corner
(3) Fill in the IP address of Q16pro,and then click
"OK".Now the device and Q16pro is connected.
Load Scene
Red indicates current scene,green indicates the save
scene,white indicates blank scene
e.g: As shown in the right picture,it is in Group 1 Scene2,
click 1 to switch to Group 1 Scene ;If you need to load
scenes in other groups,select group first and then the
scene.
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197 | support@rgblink.com | www.rgblink.com
in the
42