RGBlink Q16pro User Manual page 34

Group
When enter Layer Management interface, the
window is blank. The screen group created in Display
System shall be dragged from the Group.
Signal
Signal list, showing all input signals and resolutions
currently. Drag the signal to the display.
click ,users can rename the input signal and then
click to confirm.
Audio
Q16pro supports Audio Input/Output Module,which
should be inserted into the slots supporting both
input&output module.
1. Select a bank you would like to add audios;
Every bank and every layer can be added different audio
inputs&outputs.
2. Drag audio inputs from "Signal List"to audio outputs
as shown in the right figure;You can also drag a new
audio input to replace the previous one.
The relation between audio input and output is unique;
3. Click left mouse to adjust the volume in "volume
bar"shown in the audio output.
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197 | support@rgblink.com | www.rgblink.com
34