RGBlink Q16pro User Manual page 30

Input Module Info : users can check current input
module name and MCU version
"...." indicates that there are no input modules,as
shown in the right figure.
Output Module Info : users can check current
output module name and MCU version
IP : Show IP Address, Netmask, Gateway
IP default:192.168.1.200
Note: after modifying IP, the device needs to be powered off and restated in 30s.
Factory Setting
Note: After factory reset,the device needs to be powered off and restarted,and the IP will be reset to 192.168.1.200.
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197 | support@rgblink.com | www.rgblink.com
30