Function List - Fujitsu MB95200H Series Setup Manual

3.2 Function List

The EV-board consists of a board and a sample firmware. The board provides a useful
platform for using the MCU and its peripherals. It is a useful development platform together
with a BGMA (PN: MB2146-08-E) and a SOFTUNE. It features the following functions,
Clock and sub-clock
USB 5V power IF, external 5V power IF and the battery
Reset circuit and reset key
Provide IDC10 debug interface
LEDs for general use, LED1 indicates DBG pin work status
Provide one buzzer to demonstrate timer output
2 keys for general use
Potentiometer and temperature sensor
RS-232 level converter and DB9 interface (MAX232)
LIN circuit reserved
SIO 4 pins reserved
All MCU ports are easy accessible through test pins
Optional Starter kit to support each available MCU packages
Starter Kit MB2146-410-01-E Setup Guide V1.1
Chapter 3 EV-board Manual
MCU-UM-500002-E-11 – Page 9