Canon imageFormula DR-9050C User Manual page 37

4.
Press [Enter].
Enter Key
The current setting is indicated by blinking square brackets
[ ].
5.
Press the [ ] or [ ] key to select [0], [1] or [2].
6.
Press [Enter] to accept the selection.
The Document Feed Tray moves to the selected height.
7.
Press the Stop key to exit the User Mode.
■ Document Guides
Slide the document guides to fit the width of your
document.
Hint
The positions of the left and right document guides can also be
locked independently for off-center loading. For details, see
"Adjusting the Document Guides" (p.
■ Document Feeder Tray Extension / Extension
Wire
Pull out the tray extension as needed for the length of your
document.
3-7
Chapter 3 Basic Operation
3-8).