Adjusting The Document Guides - Canon imageFormula DR-9050C User Manual

Gently open the extension wire.
Hint
Use the extension wire if the document extends beyond the
edge of the document tray.

Adjusting the Document Guides

The document guides normally extend at equal distances from
the left and right of the center of feeding so that your
documents are centered in the feed inlet.
However, each document guide has its own lock lever, so you
can load documents to the left or right of center by locking the
document guides at the appropriate positions.
■ Loading Documents at the Left Side
This example shows the procedure for loading documents
at the left side of the feeder.
1.
Spread the document guides all the way to the left
and right.
2.
Load your documents against the left feed guide.
3.
Lock the left document guide (a) by pulling out the
lock lever, then slide the right document guide to the
right edge of your documents (b).
3-8
Chapter 3 Basic Operation