Canon imageFormula DR-9050C User Manual page 114

Dots per inch
Select the scanning resolution.
Hint
• Higher resolutions provide clearer images, but produce larger
files.
• The [Moire Reduction] setting is enabled when the resolution
is set to 300 dpi or lower, and the [Image Quality] setting is
enabled when the resolution is set to 400 or 600 dpi.
• The [Advanced Text Enhancement II] mode cannot be used
when the resolution is set to 400 or 600 dpi.
Scanning Side
Select which page side(s) to scan.
[Simplex]
Scans the front side (top) of documents.
[Duplex]
Scans both sides of documents.
[Skip blank page]
As each document page is scanned, its scanned image is
judged as to whether it is blank, and if so, the image is not
saved.
Hint
• When the [Scan Options] on the [Basic] tab sheet is set to
[Scan Single Page] for the TWAIN driver, the scanning side is
set to [Simplex] and cannot be changed.
(TWAIN driver only)" on p. 8-10.)
• Selecting [Skip blank page] enables the [Setting] button,
which opens the [BlankSkip Setting] dialog box.
• Adjust the [Content density] setting in the [BlankSkip Setting]
• Adjust the content density according to the document content.
• If the application program provides its own simplex/duplex
[Folio]
Documents that are normally folded in half are scanned on
both sides and then composed into one image.
Scan" on p. 4-6.)
When [Folio] is not displayed, the batch separation setting
on the [Others] tab sheet is set to [Patchcode] (Optional).
(See "Batch Separation" on p. 8-20.)
[Deskew] Check Box
The Deskew function detects slanted document pages and
straightens the scanned images.
The Deskew function does not work properly in the
following situations. Disable the Deskew function in these
cases.
• When scanning a page with a dark area near the edge of the
(See "[Scan Options]
• When scanning a glossy or reflective document
• When the brightness setting is incorrect
• When the Custom setting is selected in the Gamma Settings
8-9
Chapter 8 ISIS/TWAIN Driver Settings
dialog box if you specify [Skip blank page], but blank pages
are not skipped, or if non-blank pages are skipped.
– When blank pages are not skipped, increase the content
density.
– When non-blank pages are skipped, reduce the content
density.
scanning side setting, select Simplex for this setting.
Hint
IMPORTANT
page
dialog box
(See "Folio