Setup Procedures - Canon imageFormula DR-9050C User Manual

1.

Setup Procedures

Perform the following setup procedures to prepare the scanner for use.
Step 1: Confirm the installation requirements.
Step 2: Install the Software. (See p. 2-4)
Step 3: Connect the scanner to the computer.
Step 4: Turn the power ON (Scanner recognition).
IMPORTANT
• Make sure that you install the software before connecting the
scanner to the computer.
• If you connect the scanner to the computer before installing
the software, a wizard screen such as the one shown below
will appear when you turn the scanner ON. In this case, click
[Cancel] to close the wizard screen, and then turn the scanner
OFF.
• Windows 2000
(See p. 2-3)
(See p. 2-6)
(See p. 2-9)
• Windows XP
• Windows Vista
2-2
Chapter 2 Setup