Before Use; Job Function; Starting The Job Registration Tool - Canon imageFormula DR-9050C User Manual

1.

Before Use

The Job Registration Tool is an application for registering jobs that can be executed from the [Job] key on the control panel. This
chapter describes the settings for the Job Registration Tool. For details on the Job Function, see

Job Function

The job function is for using the [Job] key on the control panel
to select and execute jobs registered by Job Registration Tool,
and allows you to execute scanning without using a scanning
application.
Hint
• Job registration stores scanning condition settings, image file
format selection, save destination and image data processing
settings for each job to be used with the Job Function.
• Up to 99 jobs can be registered with the Job Registration Tool.

Starting the Job Registration Tool

Follow the procedure below to start the Job Registration Tool.
1.
Click the [Start] button, and then click [All Programs]
- [Canon DR-XXXX] - [Job Registration Tool]. (XXXX
varies depending on the model you are using)
Chapter 9 Job Registration Tool Settings
"About the Job Function" on p.
The Job Registration Tool starts.
9-2
3-14.