Table of Contents
Advertisement
● Caution / Maintenance and Inspection of the Machine
▶Any maintenance and inspection of the machine must be carried out by authorized technicians
only.
▶The maintenance and inspection of the electronic system must be conducted by the Sunstar
dealer or an authorized electric engineer.
▶Turn the power off and unplug the machine before conducting the following operations:
@@－Inspection or adjustment of the machine
@@－Replacement of any consumable parts like hook
@@※ In case of using the clutch motor, the motor will be rotated for a moment due to its
inertia, even the power is turned off. Wait until the motor to stop completely.
▶Take a special care when conducting adjustments that it requires power or air pressure.
▶When using a table with casters, fix the casters.
▶Because of the heavy weight of the machine, a minimum of two person must be involved in
titling the machine back or return.
▶In case of replacing any parts of the machine, use the genuine spare parts made by SunStar.
▶If the safety devices provided by the manufacturer have been disassembled during the
maintenance of the machine, be sure to reassemble the devices. And, check whether the
reassembled safety devices work normally or not.
▶Sunstar will not take any responsibility for any problems caused by the alteration made to the
machine by unauthorized persons without the permission from manufacturor
8
Advertisement
Table of Contents
