METHVEN Aroha 3 Installation Manual

Handle Extension Parts
For deeper installations, remove short threaded head works collars and replace with Spindle
Extension Kit (kit sufficient to extend two headworks).
JUNE 2012
Methven Australia Pty Ltd
ABN 15 104 813 390
Melbourne, Australia
www.methven.com
32 - 46mm
Cold Inlet
MA019281
Aroha 3 Hole Hob Mounted Basin Set
Aroha 3 Hole Hob Mounted Bath Set
Max
40mm
Installation Guide
IMPORTANT
Please read all of the instructions before installation
Use of this product is recommended for domestic and commercial applications.
All pipework must be thoroughly flushed prior to the installation of the mixer.
Inline filter washers must be installed on both hot and cold supplies to prevent foreign particles
damaging the ceramic head works.
Do not remove the ceramic head works from the mixer when installing.
Methven recommends a licensed plumber carry out all installations in compliance with
the requirements of AS/NZS 3500. This product complies with AS/NZS 3718 regulations.
Basin: 01-9281
Bath: 01-9304
Bath Set Illustration Depicted Only
www.methven.com
Customer Care Hotline: 1300 METHVEN (638 483)
Email: info@au.methven.com
Applies to basin
mixer only
WMKA21005